what is air chisel?pa explain po tagalog pls
1. what is air chisel?pa explain po tagalog pls
Answer:
An air hammer, also known as an air chisel, is a pneumatic hand tool used to carve in stone, and to break or cut metal objects apart. It is designed to accept different tools depending on the required function
Explanation:
TAGALOG;
Ang air hammer, na kilala rin bilang isang air chisel, ay isang pneumatic hand tool na ginagamit sa pag-ukit sa bato, at sa pagsira o paghiwa-hiwalay ng mga metal na bagay. Ito ay dinisenyo upang tumanggap ng iba't ibang mga tool depende sa kinakailangang function.
HOPE IT HELPS
2. what is the design of a chisel in which the handle fits into a cone-shape opening A.firmer chisel B.gauge chisel C.socket chisel D.Tang chisel
CHISELS
Answer:
What is the design of a chisel in which the handle fits into a cone-shape opening.
C. socket chisel[tex] \: [/tex]
3. Which of the following is Not a type of Clod chisel?a. Flat chisel b. Cape chiselc. Diamond point chiseld. None of the above
Answer:
D. Non Of The above
Explanation:
thats my answer for me
4. What kind of tool is used for roughing off surfaces?A. chiselB. fileC. gougeD.Rasp- A. chisel
Answer:
[tex]\huge\tt{\blue{A}\pink{n}\purple{s}\blue{w}\pink{e}\purple{r}\blue{:}}[/tex]
What kind of tool is used for roughing off surfaces?A. chiselB. file
C. gouge
D.Rasp
Explanation:
#CARRY_ON_LEARNING5. a deep well that is full of chisel
Answer:
MOUTH is a deep well that is full of chisels
6. what kind of tools is chisel?
Answer:
You can use sharpening stone , sand paper , and a grinder to sharpen the chisels
7. What is the worker tool of chisel
Answer:
A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.
Answer:
CUTTING EDGE
Explanation:
its particularly grinding
8. WORKER: TOOLsculptor: chisel
what is the question ???
9. para saan ginagamit ang chisel
Explanation:
pag open ng bagay gaya ng pinto ganun
10. chisels and wedges with mushroomed heads
Answer:
Impact tools such as chisels, wedges, or drift pins are unsafe if they have mushroomed heads. The heads might shatter on impact, sending sharp fragments flying.
11. Screwdriver can be used as plier or chisel.
Answer:
The screwdriver should never be used as a lever or a chisel
12. how handle the chisel?
Answer:
Keep the bottom of the chisel in contact with the wood as you move. When paring, push the paring chisel into the wood while the wood lies flat on a surface. This will keep your cuts smooth and level. Tip: When you pare, you are not taking off large amounts of wood, so you can cut with or against the wood's grain
Explanation:
pa brainliest po
sana makatulong
Answer:
pa brainliest daw siya
Explanation:
thank u for the points
13. is a chisel a wedge or a wheel axle or a lever
Answer:
Chisel is an example of lever. A lever is a simple machine made of a rigid beam and a fulcrum.
14. which of the following is an example of chiselA.Square file. C.flat fileB.round chisel. D.files
Answer:
B. round chisel
Explanation:
#carryonlearning.
Answer:
A. po ata
Explanation:
I hope po i help
15. 1. Cracj chisel blade
Answer:
nasan question po? paki ayos lang pls
16. What tools to sharpening chisel?
You can use sharpening stone sandpaper, and a grinder to sharpen the chisels.
17. what is the preventive maintenance of chisel.
Answer:
When keeping the chisels on the work bench, always place them with the bevel side up. Place chisels safely within the plastic protective caps to cover cutting edges when not in use. Replace any chisel that is bent or shows dents, cracks, chips, or excessive wear.
18. what is the meaning of chisels?
chisels is a long-bladed hand tool with a beveled cutting edge and a plain handle that is struck with a hammer or mallet, used to cut or shape wood, stone, metal, or other hard materials.
verb
A long-bladed hand tool with a beveled cutting edge and a plain handle that is struck with a hammer or mallet, used to cut or shape wood, stone, metal, and other hard materials...19. a deep well that is full of chisels
Answer:
MOUTH is a deep well that is full of chisels
20. what is the correct way of using chisels?
Answer:
Step 1 – Hold chisel vertical to workpiece. To achieve this cut, hold the chisel vertical and perpendicular to the face of your workpiece with your non-dominant hand.Step 2 – Align back of chisel with scribe line. ... Step 3 – Strike chisel with mallet. ... Step 4 – Chop down then cut along.your welcome po
Answer:
Face the bevel down . Push or tap the back of the chisel
to remove thin slices. Control the depth by raising and
lowering the handle. Start recesses or mortises by
outlining the area with a sharp utility knife or by making
a series of shallow chisel cuts perpendicular to the
surface.
Explanation:
hope it help
21. tools such a chips, carving knives, gouges, and chisels are used. A. ChiselB. Hammer C. Hand curving D. Marker paint
Answer:
c. po ang sagot
I hope this helps
22. 4 steps in sharpening the blade of a chisel
Answer:
Sorry I only found 3 steps
I'm very sorry you can just report me
Hope it helps you well
#carry_on_learning
23. what kind of tool is Air Chisel
Answer:
pneumatic hand tool
Explanation:
sana matulog
24. Why are there many types of chisels?
Answer:
mo sa pagong
Explanation:
dahil ang dahon ay dinasaur
Answer:
It's kind of a staple tool, especially for woodworkers. The thing is, there are many different types of chisels.These tools are used to shape, carve, and sharpen materials like wood, cement, bricks, stone, and metal.
Explanation:
#brainly.ph ^_^
25. never use a screwdriver as chisel and why?
Answer:
follow for more answers
Explanation:
You should never use a screwdriver as a chisel because it is not designed to withstand the lateral forces that are exerted when using it as a chisel. This can cause the screwdriver to bend, break, or even fly off and cause injury. Screwdrivers are designed for turning screws and are not strong enough to be used as chisels.
26. describe a cold chisel
Explanation:
A cold chisel is a tool made of tempered steel used for cutting 'cold' metals, meaning that they are not used in conjunction with heating torches, forges, etc. ... The name cold chisel comes from its use by blacksmiths to cut metal while it was cold as compared to other tools they used to cut hot metal.
27. 3. WORKER: TOOLsculptor : chisel -
Answer:
hard tool
Explanation:
its really heart
28. This is used in the absence of bar cutter a. cold chisel b. chisel c. hack saw
Answer:
[tex] \huge answer[/tex]
A
Answer:
b po pa brainliest pls pls
29. what are the types of cold chisel
Answer:
They are supplied in a range of sizes but there are four main types, Flat Cold Chisel, Cross Cut Chisel, Round Nose Chisel and Diamond Point Chisel. Most cold chisels have a 'dome shaped' head. When a cold chisel is continually hit by a ball pein hammer, it eventually creates burrs.
Explanation:
30. what are chisels for used?
Chisel tools are used for cutting or carving hard materials such as metal, stone or wood. A chisel tool has a shaped cutting edge of a blade on its end, with a handle that is characteristically made of wood or metal. In order to cut into a material – wood or metal – a chisel tool is forced into the material.
